| 0,09
mm |
0,45
mm |
| 0,10
mm |
0,50
mm |
| 0,11
mm |
0,55
mm |
| 0,12
mm |
0.60
mm |
| 0,13
mm |
0,65
mm |
| 0,14
mm |
0,70
mm |
| 0,15
mm |
0,75
mm |
| 0,16
mm |
0,80
mm |
| 0,17
mm |
0,90
mm |
| 0,18
mm |
1,00
mm |
| 0,19
mm |
1,10
mm |
| 0,20
mm |
1,20
mm |
| 0,22
mm |
1,30
mm |
| 0,25
mm |
1,40
mm |
| 0,28
mm |
1,50
mm |
| 0,30
mm |
1,60
mm |
| 0,32
mm |
1,70
mm |
| 0,35
mm |
1,80
mm |
| 0,38
mm |
1,90
mm |
| 0,40
mm |
2,00
mm |
|
- 7
mm width is available to 1,50 mm thickness
- 8
mm width is available to 1,50 mm thickness
- 10
mm width is available from 0,45 to
1,60 mm thickness
-
12 mm the full range is available
-
Some sizes are now available in hardened
and tempered Stainless Steel. This
is a special order item at this time.
-
The Steel listed on this page has
a hardness, depending on size, of
HRC 51.7 to 56.3
-
These Steels have good wear resistance
and a full round edge.
-
This high quality steel will give
you a smooth weaving face so that
you can weave on all 4 sides.
-
This Steel can also be enhanced by
applying the DLD 2000 Coating.
-
The coating will increase the surface
hardness to 82 HRC and the surface
will be as slick as Teflon.
|
